Rolleinar Close up Lenses

When I sent in my Rolleiflex for its service to Brian Mickleboro, I had a chat to him about my use of the camera. I said my only criticism is that I'd like it to focus a little closer, Brian suggested I try a Rolleinar close up lens.
Brian explained-Rolleinars come in three versions 1 for head and shoulders, 2 for close crop of head shots and 3 which is for very close up subjects like flowers etc.
Here's what they look like on the camera:


Rolleinars normally come as a set of two the thinner being the taking lens, i say normally because earlier versions are 'three piece' with two identical diopters that are interchangeable and a wider parallax lens that can be paired with either of the thinner lenses.
The wider of the two lenses goes on the top (viewing) lens and it is important that the red spot faces upright for parallax correction:


Performance:
I know what you're thinking, putting extra glass in front of the lens is a bad idea for the quality minded photographer right?
Not with these little wonders it isn't.
So what of the performance? Well to sum it up these close up lenses work very well, surprisingly well would be an understatement.
Here is a close up of my daughter shot at 1/60 F5,6 on Adox CHS 50 ART (EFKE KB17) with a Rolleinar 1


The 100% crop


I'd say that for the money (I paid £10 for the Rolleinar 1) that every Rolleiflex/Cord owner should have one in their camera bag, the performance of the lenses is very good indeed and makes them a 'must have' accessory.

© All text and images Mark Antony Smith 2008

Rolleiflex T

The Rolleiflex T was originally designed to fit between the budget Rolleicord and the Rolleiflex F models.
The 'T' designation is understood to stand for Tessar as the camera is fitted with the cheaper 4 element lens often found on Rolleicords rather than the Zeiss Planar or Schneider Xenotar found on the 'F' models.
Some say the T really stands for (T)heodor after its designer Theodor Uhl whose sevices were apparently dispensed with after the bean counters at Rollei saw his handiwork.
That didn't stop the camera becoming a success with a production timeframe of 1958-76 and about 127,250 units being made.
My version of the camera comes in grey leather and judging by the serial number was produced in the early 1960's as a rule of thumb most grey cameras are early (pre 1966) a majority of T's are black.
A list of serial numbers can be found here
should you wish to date your Rollei.


The picture above shows the easiest way to tell the T model from a distance, it is the only Rollei with the shutter button on the side.
Even though the camera is positioned between the budget 'cord and the pro 'flex it certainly has more of the Flex's 'genes'
I've often seen people give the advice to get a Rolleicord over the T as the lenses are pretty much equal and the cords are cheaper, I'd advise that prospective purchasers should get a T as they are much better in daily use.
Below is one of the main reasons I prefer the T to my Rolleicord


The view above graphically illustrates how much brighter the T is compared to a similar aged Rolleicord, no doubt later Cords have better screens but I've always found them duller and slower to focus.
The Tessar lens is a design classic, less elements than the Planar and by some accounts not as sharp at the edges, but for the Portrait type work that TLR's excel it is a wonderful lens.




Both of the above images were taken within minutes of ripping open the box, they were taken on Neopan 400 with guessed exposures.

Edit:

I've had the camera and just love it if you are teetering on the brink of buying a Rollei just do it!

I recently saw this quote on a Photo forum:

"Get a Rollei. Life is to short to have spent it with photography without a Rollei".

©Text and Images Mark Antony Smith 2008

Cheap Photography (Nikkormat FT2)

Recently I chanced to come across a Nikorrmat FT2 for £25 .
The camera was made in the mid 1970's a time where mechanical cameras were the norm, most being assembled and tested by hand.
Looking at the camera it seems to have been hewn from on solid lump of steel, it has hard un-egonomic (by todays standards) edges that give it a very rugged purposeful look.
In the hands it feels very solid, and has the precision instrument feel of a very expensive hand made mechanical device, and feels remarkably comfortable in the hands.

The shutter sounds absolutely wonderful, noisier than a Leica (just) but has just about the most positive feeling release of any manual camera I've used. The design of the shutter is a Copal square with metal blades and speeds 1-1/1000 + B, flash sync is 1/125.

The speeds are located round the throat of the lens mount á la OM1 which takes a little getting used to if your previous camera had the speeds on the top plate.

The top plate has a minimalist feel without the speed dial. The control from right to left: wind-on lever (also switches on the meter) frame counter and stop down button.

To the left of the prism is a match needle meter which I'd imagine might be useful for macro work or street shooting.

Next to the meter is the serial number and the re-wind crank is in the normal position.

On very welcome feature of this model is the mirror lock up situated to the left of the lens mount, to the right is the mechanical self timer which seems to take around ten seconds, maybe slightly less.

Mounted on the camera is a 50mm F2 Nikkor H, which seems to slightly pre-date the camera but nonetheless is a very capable performer with very sharp good contrast, flare free images.

One problem with this model is that over time the meter seems to either become erratic or stop working, I'm told there is a resistor that needs cleaning or replacing.

The camera I purchased seems to have a non operational meter, which doesn't worry me as I'm used to using a spot meter with most of my film cameras.

Overall the camera is a joy to use, and as these cameras seem to be going for very little money this is a chance to buy something of real quality for pennies.

Like I stated in a previous post, if I could write a note to my younger self about to embark on the start of my photographic odyssey it would be get this camera, and a Rollei TLR.

finally a couple of pictures with the 50mm F2 H

Kodak gold 200

© Mark Antony Smith 2008

55mm F3,5 Micro Nikkor

If I could give a note of advice to my 14 year old self about to embark on buying my first camera, it would be buy a Nikkormat. The lens I'd pair it with would be the 55mm Micro Nikkor, sure the lens is slower than the average standard and a little larger than most but its versatility is pretty much unmatched.
At infinity the Micro Nikkor holds its own against any 50mm especially at apertures F5.6-11 but the amazing trick is the close focus, most 50mm lenses focus down to about 45-50cm the Nikkor seem to keep going and going right down to 24cm at which point it delivers a 0.5x magnification (it needs a extension tube to reach 1:1)

For me this makes the lens very useful, in fact it stays attached to the camera 80% of the time and has replaced the 50mm HC as my main lens which is no mean feat, it really is that good.

Another feature of the Macro is the deep set front element making it very flare resistant, no need for a lens hood here! 

Very nearly the perfect lens for most uses, its only limitation is the small maximum aperture which can also mean harder to focus under dull conditions and it also rules the optic out for low light work.

Above is an illustration of the length of the barrel at infinity and minimum focus.

Conclusion:
This lens is pretty much a must have for any Nikon manual focus user, if you have a camera that needs AI then the later 55mm F2,8 micro is just as good.
It can replace the standard 50mm F1.4-2 for pretty much everything but low light shooting, at infinity it's as good as my 50mm F2 H•C (and that's very good)

The ability to get down to half life size is something after using this lens for just a week that I can't do without.

I found this well used example for £40 at those  prices all I can say is– Get one!

Here is a shot at F5,6 at the close focus.

© Mark Antony Smith 2008

Film Is Not Dead....

I've stumbled on this site I'd like to share with anyone who hasn't seen it.
It called Film is not dead it just smells funny They have a good selection of analogue photographers and display some quite lovely work.
Here is what they say about their site.

"A place for photographers who are NOT using a digital camera.
With this web site we are trying to give analogue photographers a place to show their work to the world.
We do not hate digital photography , for our daily work we use it all the time.
But after using digital for a few years we are slowly going back to analogue.
There is more life in it, it’s more vibrant, not flat not “dead”. And the process of using film is so interesting, challenging and rewarding.
So let this be a showcase for photographers who think that “ Film is not dead it just smells funny"

I hope you enjoy their site, its good to know there's a few others out there who are gradually going back to film....
N.B
After a short time dead the link should now work the site seems to be called the International Analogue Photographic Society (Film is not dead it just smells funny)
Enjoy

Developing your first B&W film

Developing your first film may seem a daunting task, but if you follow this simple 'how to' guide the mysteries of the photographic alchemy will soon be striped away.
Question one: What equipment do I need?

Well actually surprisingly little, here is a list with essential items in Italics:

A daylight developing tank with spiral
A thermometer
A liquid measure (1 litre)
Developer
Fixer
A child's medicine syringe (5-10ml)
Stop bath
Wetting Agent
Film weights
Dark Changing Bag

Rap on Equipment Choice
There are many types of developing tank, some prefer steel, some plastic, I'll give you the name of the one I use: – Patterson
I think they make a good product with easy to load spirals, I would recommend buying a tank that holds a 120 rollfilm as even if you don't own a MF camera you can process two 35mm in one go.

Rap on Developer Choice
Just about everyone has their favourite 'brew' but I recommend until you get on your feet a simple just add water, use and discard (one shot) developer, good starter developers include:

Agfa Rodinal
Ilford Ilfosol S
Patterson Aculux

These developers come as liquids ready for dilution and use, once you have developed your film they are disposed of.
This type of developer is in my opinion the easiest for the first timer, as it is a mix it use and dispose.
It will also be helpful to start with the manufactures time and agitation, if you can't find a time for your developer/film combo try the Massive Dev Chart

Tightwad alert
You'll notice above that some items are considered essential (italicised) and others are actually not considered needed to get you there.
Stop bath, although desirable can be substituted with water, wetting agent with normal washing up liquid, weights with wooden clothes pegs, and the dark bag can be dispensed with by using a cupboard or wardrobe at night with the lights out. My first film was loaded in the cupboard under the stairs, with a coat placed at the bottom of the door to cut out the light.

I have all the stuff, what do I do with it?
First do a dry run, practice loading a blank film firstly in daylight, then in your dark area – is advisable to sit in your dark area for 5 mins before loading as it must be completely dark! Your eyes should not see anything, not even your hand in front of your face!

Tip: During re-wind try to leave out your film leader so you can cut off the tongue (save it for tip2) then feed the first 4 inches or so into the reel in daylight-see image below:


Once you feel confident you can load your film into your tank in total darkness. After the film has been loaded the rest of the process is in the light:- Yeah

Prepare your chemicals according to the instructions, use the thermometer to make sure the developer is at the correct temperature normally 20°c, (68F) stop bath and fixer should be approximately the same temperature as the developer.

Pour in the developer slowly making a note of the time (a second hand on a watch is good for this), initial agitation is normally continuous 30 seconds or so depending on developer, then give the tank three sharp taps on your work surface.
It is good practice to keep a tally of the time passed, and remember to keep the agitation consistent and not too vigorous as consistency is key in the world of processing.
Once you have nearly finished development get ready to pour out the chemical about 15 seconds before the final developer time, and pour out slowly.
Next step is to pour in the stop bath, or if you're like me plain water as I only use stop bath if the dev time is less than 5 mins.
After rinse/stop pour out carefully and now pour in the fixer.
Fixing time for most films in fresh solution is quite short say 2-3 mins T-Max type films need a little longer and come out pinkish if under fixed.
Tip2:
If you use 35mm film use the tongue that you cut off prior to loading the film, put it in a small beaker of fix, take the time it takes to clear and double it, that will give you a total fixing time for your film.
Once you have fixed your film pour the liquid back into the container and leave the tank under running water for at least 10 mins, if possible empty the water and agitate to help wash the film.
After washing is complete put in your Photo-flow (normally just a few drops)- if you are really cheap a drop of washing up liquid. This will give you film a nice finish and help avoid 'run marks' during the drying process.Remove your film from the tank carefully and hang it somewhere to dry, a shower is a good place I clip my films with a clothes peg top and bottom so they dry nice and straight.
That's it! you're done, just be sure to cut your films and sleeve them in archival sleeving and store them safely and they should last many years.

© Mark Antony Smith 2008

Trichrome


Just another try at the RGB process from B&W film (see previous post)
Shot on a Fuji 6x7 rangefinder using Fuji Neopan 400
If you have a colour aware browser you can see the original here:
correct colours
© Mark Antony Smith 2008

Olympus Trip 35

If any camera can claim to be a 'Volkscamera' then this one has to be fairly high on the list with over 10 million made between 1968 and 1988.
The camera is a very well built, totally automatic exposure (no batteries as it has a selenium cell round lens) and scale focus. The lens is a 40 mm F2,8 Zuiko probably a 4 element Tessar clone. Round the lens is the ASA/ISO ring that is marked 25-400 which should cover most films you'd want to use.
When this camera was a current model, it was very cheap and often came in kits with a flash and a roll of film.
If you get one in good working order today, expect to pay £5-10 (about $10-$20) as a rough price guide slightly more or less depending on condition.


And a 100% crop


A really impressive little performer, not quite up to 50mm prime lens standard but very close all things considered, very sharp 8x12" (A4) prints will be no problem.
The on board auto exposure is remarkably good also, probably good enough to use slide film! (although I've not yet tried)
Certainly this model gives a better image than its price point would suggest and coupled with ease of use would make a great first camera for a child or just for pocket carry everywhere use.


Another shot this time late afternoon:


I bought this camera for my seven year old son, and he loves it. Its sturdy build coupled with ease of use and excellent results make it a bargain.

Just a note:

If you wish to buy a trip this guy has some very nice ones, some with custom leather from £30.00!

Link 'Tripman"
© Mark Smith 2008

Kodak Royal-x-Pan

I recently chanced to come by a roll of this iconic film. The film is out of date by some margin (expired 1976) and also a reject roll given to a Kodak employee.
I believe at the time of release that this was the fastest film produced by Kodak, with an ASA rating of 1250.
Exposing it 32 years after it has expired I really didn't expect much after all fast film generally doesn't keep well and depending on storage could be completely fogged and will certainly have reduced speed and higher base fog.

I decided to rate it at 100 ISO to account for the lost speed and develop it in Rodinal 1:25 for 6 mins one inversion every 30 seconds.
I also exposed it on a nice bright clear day in order to maximize the contrast.
here are a couple of images from the roll.

On the whole i am actually surprised to find that the film could record anyhting at all years after the 'best before' date.
The base of the film had quite a high level of fog and also there were some spots on the emulsion caused probably by storage over the last 30 plus years.
So if you find a roll of out of date film why not give it a try?

© Mark Antony Smith 2008

Ilford Delta 3200

Ilfords Delta 3200 is one of the fastest films available, along with Kodak T-Max 3200 and is a modern tabular (T-grain) emulsion, from Ilfords website:

"Ilford Delta films use a new crystal structure called Core Shell. These new technology crystals capture light more efficiently, offer a smoother tonal range, finer grain and greater sharpness than conventional technology films. The ultra high quality generated by the DELTA PROFESSIONAL films however, requires a bit more care in exposure and processing".

According to Ilford, Delta 3200 has an ISO speed rating of 1000 for daylight exposure when developed in their standard ID 11 developer.
Why call it Delta 3200 if it has an ISO speed of 1000?
Here's a quote from Ilford:

It should be noted that the exposure index (EI)
range recommended for DELTA 3200 Professional
is based on a practical evaluation of film speed
and is not based on foot speed, as is the ISO
standard.
So basically its a 1000ISO film that can be pushed and give good results at EI 3200.

Good image quality can be obtained between EI 400- 6400 and can be pushed to EI 25 000.
One of the huge benefits of Ilfords emulsion over the Kodak T-Max 3200 is that the emulsion is available in 120 size making hand held low light medium format photography a possiblity.
For more info Ilford have a PDF that lists developers and processing times.

So armed with a few rolls I set about taking some low light images at a local night club.

I rated the films at EI3200 which in the conditions I found myself shooting at 1/15- 1/60 at F3,5-4 so it was pretty dark here are some photos.

From memory the above shot was 1/15 wide open at F3,5

This shot was 1/60 at F4
Here is a 100% crop to show grain character.

My first thoughts were Wow look at the tonal range, grain is a little pronounced in the mid tones but pretty good for a film rated at this speed.

Of course these were shot on 120, so tonally they are going to be better than 35mm, ditto grain.

My experiences with the 35mm version are that its is best rated at 800- 1600 EI and developed in Microphen or DD-X where tonally it seems to be ahead of the competition with just slightly more apparent grain, rated at 3200 and processed in Rodinal gives a very gritty look.

I really like this film, especially in 120 where low light hand held portraits are certainly a possibility and as it's the only game in town (please note Kodak and Fuji) at this speed. I can't recommend it more, so if you shoot low light in 120 try this film you won't regret it!

Text and images © Mark Antony Smith

Fuji 6x7 Rangefinder

I have wanted one of these Fuji RF cameras for years, if you have been a reader of my blog you'll know that I also use a Pentax 6x7. As much as I like the the Pentax I've always thought it was a little on the heavy side, and in the year or so I've been using it I've rarely found a need to change lenses and found myself using the 90mm for 80% of shots, so its biggest advantage over the Fuji was negated for me. Being a Leica RF user and very much enjoying shooting with RF cameras the Fuji is an obvious upgrade. So when the above camera came into my dealer with only 38 on the roll counter the Pentax was exchanged.

First Impressions

My camera is a MKIII version, and has the ergonomic plastic cover rather than the more substantial looking metal case of earlier Fuji RF cameras. If you squeeze it a slight creaky sound can be heard, I think this is what makes people feel the later cameras aren't as well built. Personally I feel that its just the plastic grip and the overall feel of the camera in your hand makes it worth the creakiness.

The Fuji 6x7 and 6x9 share the same body and lens (90mm F3,5 EBC) the only difference being (apart from negative size) the frame lines and film advance mehanism. The finder has a gold type focus spot and the viewfinder has a slightly blue tinge to contrast with the spot which helps focus. The frame lines move with focus to correct with parallax athough I'm not sure how accurate they are especially when at closest focus (1 metre) One thing I have noticed is that the hood when extended can be seen in the bottom right hand corner of the viewfinder, which is a slight distraction.

Loading the camera is pretty easy, there are two red buttons inside the back that when pressed allow the film to be placed in the camera very quickly. Advance is double stroke, one full and the second stroke is about half (presumably to cock the shutter)

The lens is fixed with a leaf shutter and a 67mm filter thread. The aperture is at the end of the lens under the built in hood (which must be in the out position to change speed/F numbers) I remeber the Olympus OM system had the aperture ring in a similar place. Stranger still is that the shutter is also positioned there, but when you get used to it it's OK and quite fast in operation.

So far I'm finding the camera to be well balanced and a good all round performer, the optics are very good, operation quick, and size and weight manageable for such a large format.

Here are some shots:

The above was shot on HP5+ developed in Rodinal 1:50 for 9 min

more to follow

Scanning B&W film

Scanning is a bit of a black art, so many different settings, scanning options, scanner types etc.
This blog entry concerns itself with the mechanics of obtaining the best scan from any machine, flatbed or dedicated film scanner.

It is not meant to be the ultimate scan guide, but is just the method I use that gives me what I feel are good results.

Scan software
Whether you use the software that came with your scanner or an after-market solution like Ed Hamricks Vuescan which supports a wide range of scanners here are a few tips.

The settings in your scan software will vary but what you should look for is a dialogue a little like this one:

This is the curves dialogue and should look like a 45° slope with the black and white points away from the centre (the small triangles at the bottom) Below is the same scan but with a histogram.

Note the setting of the black and white points as not to clip the histogram.In other words set the black and white points near but not touching the histogram. Most scanner software even gives a preview and we are looking for a flat image like this one:

Getting the info from the film into the file.
Normally this means scanning with little correction, just getting the whitest point a very light grey and the darkest point almost black it also helps if you scan as 16 bit greyscale as when the time comes to edit the file we need as much info as possible.
The important thing here is to preserve as much information as you can from the film and the resulting histogram will look similar to this.


Above is the levels dialogue, which shows the values in the image as a histogram, that is as if the values have been 'piled up' like bricks.
The most common tones are the highest spikes, but what we are looking for here is the values to be placed in the centre, with nothing 'clipping' from either end.
At the left hand side is the black point and the right is the white, the centre is the grey point which changes the density.
Normally we pull the two extreme ends towards the centre thus setting the black point and the white point.
The image above is exaggerated but what I look for is no clipping of white or black values or from the top of the 'hump' I find this gives a good compromise between clipping info and maximizing the tones in the final image.

Once you have set these three points the flat looking file we started with will now start to look as we envisioned.
The Histogram will now look flatter and wider and if we scanned in 16bit should have no info missing with its tell tale 'comb' effect on the histogram.

This should be the effect on the image, a slightly punchier result with black and white tones in the places they should be

Even though our scan now looks a lot better our next step will consolidate and hopefully add a little 'snap' without clipping too much info.

What I have found is that applying the unsharp mask tool in Photoshop with a high Radius setting and a low amount setting–say amount 30 Radius 60 (although these will vary from image to image) will give a contrast sharpen with pleasing results.

This makes our flat looking image a little more 'dynamic' looking without having to resort to the ordinary contrast tool which is a lot coarser in its action.

The original image is side by side for comparison 

Final 'tweeking' including spotting and final sharpening and in the finished shot below the application of a warm tone duotone created in photoshop to give a chlorobromide paper effect 

© Mark Antony Smith 2008

Fortepan 100

Forte were a Hungarian photo materials manufacturer, I say 'were' because as of last year (2007) they ceased trading.
So rather than this being a test of a going concerns product it will now be only of historical interest after the remaining stocks are used up.
I believe the Forte factory was originally built by Kodak as part of a European expansion program in the early 20th Century. I would imagine that after the war the plant now being in the Eastern Bloc meant that Forte were put under government control, but there doesn't seem to be much about this on the internet (I'll slot info in here as/if I find it).

I can only source the film in 120 Rolls and have no experience with the 35mm so this test was solely shot on 120.
I started by exposing at the box speed of 100ISO and developing the film for 10 mins in Rodinal at 1:50.
The resulting negatives looked pretty high in contrast, and a little low on shadow detail even for the bright lighting conditions.


Looking at the 100% crop, grain seems OK not as good as FP4, APX or Plus-x but acceptable.



You can tell that this film is old technology even compared to 1970's Kodak or Ilford emulsions, I would imagine that the film is similar to films from the 1940's or 50's which is not a bad thing if you want a slightly 'retro' look.
To be fair to this film it was very cheap, and I originally bought it to put in my 1930's Bessa for which it was perfect.
But if I were to use it in a modern camera I would rate it at EI50-64 and drop the development time by 20% (8 mins 1:50 in Rodinal) in order to cut the contrast and improve shadow detail.
I still have a few rolls left so possibly I'll add to this test my results with amended exposure and development times.

OK I've tried about 6-7 rolls of the Fortepan now and I have to say I really like it!

I bought the last 10 rolls from Retrophotographic although they still have some 400 left (at time of writing– Feb 08)

I think the settings that work for me are rating it at EI 64 then developing in Rodinal 1:50 for 8 ½ mins.

Here are some images:

I really a shame this film is no longer in production, try a roll while you can.

Images and text © Mark Antony Smith

Colour Images from B&W Film

Norwich Market– B&W Tri-x-panchromatic film

What? I hear you say, surely thats the wrong way round?

No the title is correct, I'm going to demonstrate how to make your favourite monochrome film into a true colour image.

The whole idea behind this post came in a Eureka moment whilst showing a photographer the channel mixer method for obtaining better black and white from colour images in Adobe Photoshop.
Colour digital camera images are normally made up of three mono images one representing red one blue and one green. When these are combined the information makes up the colour image.

I explained to the photographer, 'each channel is rather like a b&w photo taken with either a red green or blue filter over the lens' and then it struck me I could do it the other way and use a normal mono film like say Tri-X or Ilford Delta and get colour results.

If this all sounds far fetched and you doubt my sanity (don't worry I do too) other photographers have used similar methods over 100 years ago (not with Photoshop though). One particular example is Russian photographer Sergi Prokudin-Gorskii who made some very fine colour images in the period 1905-1915.

So how is it done? how do you make colour Tri-X-Pan?

First of all you will need a red, green and blue filter to put over the lens, your favourite black and white film and possibly a tripod.

Load the film as normal, screw in the red filter and take your first shot (remember to compensate for reduced light if you are using a non TTL camera) then carefully unscrew the red and replace it with green, then repeat for the blue.
I find it easier to do in RGB order so that I can identify the frames later.

Process the film as normal, you should have three slightly different looking negs.
These now need to be scanned in greyscale, saving each image with an R or G, B so that later you can remember which one is which.

Red Filter

Green Filter

Blue Filter

The resulting files should all have exactly the same pixel dimensions i.e 3000x2000.
Next open each one of the 3 in photoshop and then with the red open click on the channels tab and select the merge channels option from the palette
The merge option wont appear if your photos don't have the same pixel dimensions.

Next the RGB option needs to be selected.

After that it will confirm the 3 images you'd like to merge.
My first result looks OK the wind moved the trees during exposure causing some 'off register' colour fringe but I think after a little more practice, possibly a tripod and no wind would yield a better result:
Ladies and gentlemen I give you colour Tri-X

The above 'experiment' just makes me realise how good the work of Sergei Mikhailovich Prokudin-Gorskii and others that used this process really is, and I'm pretty sure that armed with a tripod and finer grained film that I'll give this another try.

Here if anyone is interested is my try on a finer grained film (Agfa APX 100) and a tripod.

Taken just after dawn the main problem here is that slow film, little light and filters mean an exposure of 1/2 sec at F2,8
I like the shot anyhow which is of a ship used as a shed by bait diggers, I particularly like the brand new red windows which still have the retailers stickers in the centre!
And a final one closer.

All in all an interesting process and one I shall play with in the future
EDIT: Since drafting this post I've become aware of others who are using similar techniques one such person is Henri Gaud whose blog Le blog de la Trichromie is an interesting read.
All Words and images © Mark Antony Smith